a range of lightweight handheld metal detectors suitable for tough environments and constant use.

the detectors can find both ferrous and non ferrous metal and are available with increasing levels of sensitivity and both audio and visual alarms.

for use at airports, prisons, schools, nightclubs, retail outlets, warehouses, conferences, special event security.

• baton design
• simple push button operation
• instant response to metal
• clear audible alarm and visual led light
• silent feature on model 11
• silent vibrate feature on model 11v
• cartridge style 9V battery
• all weather use
• rugged construction, high impact casing

• high sensitivity "ring" design detection sensor
• simple push button operation
• instant response to metal
• clear audible alarm and visual led light
• turbo control on model 17
• calibration button on model 18
• cartridge style 9V battery
• all weather use
• rugged construction, high impact casing

model 16 high sensitivity metal detector

CW-10 handheld metal detector

• audio visual alarm
• discreet vibrate alarm function
• single 9v battery required
• rugged and weatherproof

Metal Detector Gloves

Kevlar Gloves

HF-1 detector gloves give the operator the ability to have "Hands Free" metal detection with the protection of Kevlar. This gives the wearer the added protection from infected hypodermic needles, knife and razorblade wounds, during pat-down procedures, but still retain the ability to search and detect for concealed weapons or contraband with the aid of a powerful metal detector. When the HF-1 has detected a metal object it will give an alarm indication by means of a vibration against the operator's wrist.

Adams HF-1 detector gloves are of a very rugged and durable construction. They are light-weight and comfortable to wear, as well as being easy to use, with no adjustments necessary for use. Just switch them on and they are ready to go, it's that simple!

The electronic circuitry is housed inside the glove so each hand is a self contained metal detector with no visible wires or switches, etc. The detector is powered by one standard 9 volt battery or optional rechargeable NiCad.

The HF-1 gloves are available as a "Dual Active" (D/A) pair (one metal detector for each hand) or as a "Passive Active" (P/A) (one glove, of the operator's choice, either left or right hand has metal detector technology built in) while the other corresponding glove (left or right) is "Blank" (has no technology inside).

HF-1 is suitable for law enforcement, tactical operations, crowd control and military applications.

Metal Detector Pat Down Gloves

The MIT has been specifically designed for pat down and hand search procedures where the operator wants to be in close contact with the subject being searched. The MIT can be worn on either the left or right hand or one MIT on each hand, giving the operator the power of two metal detectors in use at the same time! This gives the operator the ability for fast processing of people.

When the operator has located a metal target, the MIT give an alarm indication by means of a vibration against the wearer's wrist. As the vibration is to the operator's wrist and not to the hand, the person being searched does not feel vibration. This offers the operator a covert approach to pat-down procedures. The MIT also gives the operator's fingers complete dexterity to feel for concealed objects that are of a non-metallic nature simultaneously.

MIT is fully automatic and requires no adjustments for use. It is powered by one standard 9 volt battery or optional NiCad rechargeable battery. There are no visible wires, switches or buttons. Everything is housed in a machine washable, soft stretching neoprene (wet-suit) material. The operator just puts the MIT into the "on" mode and begins a pat-down search... It's that simple!

download brochures

model 10/11/16
models 17/18
model cw10

archway metal detectors

portable metal detector - gatescan-p
fixed airport style metal detector - gatescan 150

school security
knife crime