 |
(44) (0) 207 355 3555 | |
 |
(1) 941 925 9730 |
 |
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
scanmail 10k
| Power Supply | 100V +/- 15% and 220V +/- 15% single phase 50/60 hz |
| Stand by | 12 V DC nominal. |
| Battery | High Duty Cycle, Sealed, Maintenance free, lead acid type. Fused at 2.0 amp |
| Stand by operation | 3 hours |
| Temperature | 0 -30 C |
| Dimensions |
420mm x 446mm x 228mm (unpacked) 16.5" x 17.5" x 9 " (unpacked) |
|
520mm x 550mm x 320mm (packed) 20.5" x 21.5" x 12.5" (packed) |
|
| Weight | 11 kgs (24 lbs) net, 14 kgs (31lbs) packed. |
| Max.Parcel size | 38cm (15") wide x 6cm (2.5") thick x unlimited length |
| Screening speed | Approx 10,000 items per hour. Contents of mailsack can be scanned in approximately 3-5 minutes |
| Test Card | The TEST CARD supplied with each unit shall be reliably detected at throughput rates both higher and lower than normally deployed in the mailscreening operation. |
| Non-target (paperclips/staples) | Specimen non-target supplied with unit shall not be detected under normal mailscreening conditions. Use of sensitivity plus function will reduce discrimination such that non-target may cause alarm rate of not greater than 3/10. |
| Magnetic media | Scanmail emits no radiation and will not damage camera film, magnetic tape, computer discs, cds or videos. |
